Operation Manual

DC OPERATION
The DC terminals may ONLY be used for charging 12 volt automotive-type
batteries.
CONNECTING THE BATTERY CABLES
1. Before connecting charging cables to a battery that is installed in a vehicle,
disconnect the vehicle’s ground cable from the battery.
The battery gives off explosive hydrogen gas during normal operation.
A spark or open flame can cause the battery to explode with enough
force to kill or seriously hurt you.
Keep sparks and flames away. Wear protective clothing and a face
shield, or have a skilled mechanic do battery maintenance.
2. Connect the positive (+) battery cable to the battery positive (+) terminal.
3. Connect the other end of the positive (+)
battery cable to the
generator
positive (+) terminal.
DC TERMINAL
NEGATIVE
DC TERMINAL
(BLACK)
4. Connect the negative (-) battery cable to the battery negative (-) terminal.
5. Connect the other end of the negative (-) battery cable to the generator
negative (-) terminal.
6. Start the generator.
pmiq
Do not start the vehicle while the battery charging cables are connected
and the generator is running. The vehicle or the generator may be
damaged.
17