Operation Manual

An overloaded DC circuit, excessive current draw by the battery, or a wiring

problem will trip the DC circuit breaker (PUSH button extends out). If this

happens, wait a few minutes before pushing in the circuit breaker to resume

operation. If the circuit breaker continues to go OFF, discontinue charging

and see your authorized Honda generator dealer.

DISCONNECTING THE BAlTERY CABLES

1. Stop the engine,

2. Disconnect the negative (-) battery cable from the generator negative (-)

terminal.

3. Disconnect the other end of the negative (-) battery cable from the battery

negative (-) terminal.

4. Disconnect the positive (+) battery cable from the generator positive (+)

terminal.

5. Disconnect the other end of the positive (+) battery cable from the battery

positive (+) terminal.

6. Connect the vehicle ground cable to the battery negative (-) terminal.

POSITIVE

DC TERMINAL

(RED)