Operation Manual

PRE-OPERATION CHECK

ENGINE OIL

Engine oil is a major factor affecting engine performance and service

life. Non-detergent and P-stroke engine oils will damage the engine and

are not recommended.

Check the oil level BEFORE EACH

USE with the generator on a level sur-

face with the engine stopped.

Use 4-stroke motor oil that meets or

exceeds the requirements for API ser-

vice classification SF or SG. Always

check the API SERVICE label on the oil

TEMP i2’

20 40 60

I I I

I I ,

container to be sure it includes the

-30

-20

-10 0 10 20

30 40%

AMBIENT TEMPERATURE

letters SF or SG.

SAE low-30 is recommended for general use. Other viscosities shown in

the chart may be used when the average temperature in your area is within

the indicated range.

1. Remove the oil filler cap and wipe the dipstick clean.

2. Check the oil level by inserting the dipstick into the filler neck without

screwing it in.

3. If the oil level is low, fill to the top of the oil filler neck with the recommended

oil.

DIPSTICK