Replacement Part List

17
BEFORE OPERATION
Do not place flammable objects close to the engine.
Before beginning your pre-operation checks, be sure the tiller is on a
level surface and the engine switch is in the OFF position.
Check the Engine
• Before each use, look around and underneath the engine for signs of
oil or gasoline leaks.
• Check the oil level (see page 30).
• Check the air filter (see page 36). A dirty air filter will restrict air flow
to the carburetor, reducing engine and tiller performance.
• Check the fuel level (see page 28). Starting with a full tank will help
to eliminate or reduce operating interruptions for refueling.
• Check the transmission oil (see page 33).
Check the Tiller
Tiller outside
Make sure that there are no flammable materials (dust, straw, etc.)
near the engine.
Clutch lever function
Check that the lever operates smoothly.
Wiring and cables
• Check the insulation of each wire and cable for tears and cuts.
• Check if there is any wire or cable pinched by the neighboring parts.
Bolts and nuts tightens
Check for looseness in fastened parts. Securely tighten all loose parts.
Tines
Check for excessive wear, damage, or looseness.
Engine operation
• Start the engine. Check for abnormal sounds. (See pages 19 through
20 for starting procedure.)
• Check that the engine stops securely by operating the engine switch.
(See page 24 for stopping procedure.)
• If you notice any other abnormal symptoms, consult with your
authorized Honda dealer promptly.
31V146410.book 17 ページ ２０１８年３月７日 水曜日 午前９時８分