Replacement Part List
Table Of Contents
- F220
- INTRODUCTION
- CONTENTS
- TILLER SAFETY
- COMPONENT & CONTROL LOCATIONS
- BEFORE OPERATION
- OPERATION
- SERVICING YOUR TILLER
- THE IMPORTANCE OF MAINTENANCE
- MAINTENANCE SAFETY
- MAINTENANCE SCHEDULE
- REFUELING
- FUEL RECOMMENDATIONS
- ENGINE OIL LEVEL CHECK
- ENGINE OIL CHANGE
- ENGINE OIL RECOMMENDATIONS
- TRANSMISSION OIL LEVEL CHECK (USA model)
- AIR FILTER INSPECTION
- AIR FILTER CLEANING
- SPARK PLUG SERVICE
- CLUTCH CABLE ADJUSTMENT
- THROTTLE CABLE ADJUSTMENT
- SPARK ARRESTER SERVICE (optional part)
- STORAGE
- TRANSPORTING
- TAKING CARE OF UNEXPECTED PROBLEMS
- TECHNICAL INFORMATION
- CONSUMER INFORMATION
- QUICK REFERENCE INFORMATION
18
OPERATION
SAFE OPERATING PRECAUTIONS
Before operating the tiller for the first time, please review both the
TILLER SAFETY chapter (see page 5) and the chapter titled BEFORE
OPERATION (see page 16).
For your safety, do not start or operate the tiller in an enclosed area
such as a garage. Your tiller’s exhaust contains poisonous carbon
monoxide gas that can collect rapidly in an enclosed area and cause
illness or death.
Exhaust contains poisonous carbon
monoxide gas that can build up to
dangerous levels in closed areas.
Breathing carbon monoxide can
cause unconsciousness or death.
Never run this product's engine in a
closed, or even partly closed area .
Tines are sharp and spin fast.
Spinning tines can cut you severely
and can amputate body parts.
• Wear protective footwear.
• Keep your hands and feet away
from the tines while the engine is
running.
• Stop the engine before performing
any adjustment, inspection, or
maintenance.
31V146410.book 18 ページ ２０１８年３月７日 水曜日 午前９時８分