Replacement Part List
Table Of Contents
- F220
- INTRODUCTION
- CONTENTS
- TILLER SAFETY
- COMPONENT & CONTROL LOCATIONS
- BEFORE OPERATION
- OPERATION
- SERVICING YOUR TILLER
- THE IMPORTANCE OF MAINTENANCE
- MAINTENANCE SAFETY
- MAINTENANCE SCHEDULE
- REFUELING
- FUEL RECOMMENDATIONS
- ENGINE OIL LEVEL CHECK
- ENGINE OIL CHANGE
- ENGINE OIL RECOMMENDATIONS
- TRANSMISSION OIL LEVEL CHECK (USA model)
- AIR FILTER INSPECTION
- AIR FILTER CLEANING
- SPARK PLUG SERVICE
- CLUTCH CABLE ADJUSTMENT
- THROTTLE CABLE ADJUSTMENT
- SPARK ARRESTER SERVICE (optional part)
- STORAGE
- TRANSPORTING
- TAKING CARE OF UNEXPECTED PROBLEMS
- TECHNICAL INFORMATION
- CONSUMER INFORMATION
- QUICK REFERENCE INFORMATION
20
OPERATION
4. Move the throttle lever away
from the SLOW position, about
1/3 of the way toward the
FAST position.
5. Hold the handle and pull the
starter grip until you feel
resistance, then pull briskly in the
direction of the arrow as shown.
Do not allow the starter grip to
snap back against the engine.
6. If the choke lever was moved to
the CLOSED position to start
the engine, gradually move it to
the OPEN position as the engine
warms up.
THROTTLE
LEVER
SLOW
Direction to pull
STARTER GRIP
CHOKE LEVER
OPEN
CLOSED
HOLD HERE
WHEN STARTING
31V146410.book 20 ページ ２０１８年３月７日 水曜日 午前９時８分