Replacement Part List

27
SERVICING YOUR TILLER
MAINTENANCE SCHEDULE
(1) Service every 10 operating hours or every day when used in dusty areas.
(2) Log hours of operation to determine proper maintenance intervals.
(3) These items should be serviced by your servicing dealer, unless you have the proper tools and
are mechanically proficient. Refer to the Honda shop manual for service procedures.
See “Honda Publications” on page 59 for ordering information.
(4) Change engine oil every 50 hours when used under heavy load or in high ambient
temperatures.
Failure to follow this maintenance schedule could result in non-warrantable failures.
REGULAR SERVICE PERIOD (2)
Perform at every indicated month
or operating hour interval,
whichever comes first.
After
storage
Each
use
First
month
or
20 hrs.
Every
3 months
or
50 hrs.
Every
6 months
or
100 hrs.
Every
year
or
300 hrs.
Refer to
page
Engine oil Check level o 30
Change o o o (4) 31
Air cleaner Check o 36
Clean o (1) 37
Replace o 36
Tiller outside Check o 17
Clutch lever
function
Check o
21
Engine operation Check o 19
Wiring and cables Check o 17
Bolts and nuts tightens Check-tightness o17
Transmission oil Check o 33
Spark plug Check-adjust o 38
Replace o 38
Spark arrester
(optional part)
Clean o 42
Clutch cable Check-adjust o o 40
Throttle cable Check-adjust o 41
Idle speed Check-adjust o (3) —
Clutch shoe Check o (3) —
Fuel tank and filter Clean o (3) o (3) —
Valve clearance Check-adjust o (3) —
Combustion chamber Clean After every 300 hrs. (3) —
Fuel tube Check Every 2 years (Replace if necessary) (3) —
ITEM
31V146410.book 27 ページ ２０１８年３月７日 水曜日 午前９時８分