Replacement Part List
Table Of Contents
- F220
- INTRODUCTION
- CONTENTS
- TILLER SAFETY
- COMPONENT & CONTROL LOCATIONS
- BEFORE OPERATION
- OPERATION
- SERVICING YOUR TILLER
- THE IMPORTANCE OF MAINTENANCE
- MAINTENANCE SAFETY
- MAINTENANCE SCHEDULE
- REFUELING
- FUEL RECOMMENDATIONS
- ENGINE OIL LEVEL CHECK
- ENGINE OIL CHANGE
- ENGINE OIL RECOMMENDATIONS
- TRANSMISSION OIL LEVEL CHECK (USA model)
- AIR FILTER INSPECTION
- AIR FILTER CLEANING
- SPARK PLUG SERVICE
- CLUTCH CABLE ADJUSTMENT
- THROTTLE CABLE ADJUSTMENT
- SPARK ARRESTER SERVICE (optional part)
- STORAGE
- TRANSPORTING
- TAKING CARE OF UNEXPECTED PROBLEMS
- TECHNICAL INFORMATION
- CONSUMER INFORMATION
- QUICK REFERENCE INFORMATION
58
TECHNICAL INFORMATION
Specifications
Tune-up Specifications
NOTE: Specifications are subject to change without notice.
Model F220K1
Type AT2 type CT2 type
Description code FAAJ
Dry mass [weight] 52.9 lbs (24 kg) 57.3 lbs (26 kg)
Length 47.2 in (1,200 mm)
Width 21.5 in (545 mm) 23.0 in (585 mm)
Height 38.2 in (970 mm)
Engine model GXV57T
Engine type
Single cylinder, 4-stroke, forced air
cooled, overhead valve, gasoline
Displacement
3.5 cu-in (57.3 cm
3
)
Bore x Stroke 1.77 x 1.42 in (45.0 x 36.0 mm)
Ignition system Transistor magneto
Spark plug U14FSR-UB (DENSO)
Oil capacity 10 US oz (0.30 L)
0.30 L (10.6 Imp oz)
Fuel tank capacity
0.172 US gal
(0.65 L)
0.65 L
(0.143 Imp gal)
Clutch Shoe clutch
Transmission oil capacity 0.95 US qt (0.9 L) 0.9 L (31.7 Imp oz)
ITEM SPECIFICATION MAINTENANCE
Spark plug gap
0.024 – 0.028 in
(0.6 – 0.7 mm)
Refer to page 38.
Valve clearance
IN:0.08 ± 0.02 mm (cold)
EX:0.11 ± 0.02 mm (cold)
See your
authorized Honda
dealer.
Other specification No other adjustments needed.
31V146410.book 58 ページ ２０１８年３月７日 水曜日 午前９時８分