Operation Manual

26
UPPER
WAVE WASHER
FULCRUM PIN
PROJECTION
SNAP PIN
FRONT
CLUTCH LEVER
Pull off the snap pin from the lever fulcrum pin.
By holding the clutch lever, pull out the lever fulcrum pin.
Detach the clutch lever and the wave washer.
Remove any dirt or foreign objects.
Wipe off and clean the roller surface of the clutch lever.
Set the inside and upper side direction of the wave washer as shown
in the illustration.
With the wave washer set in this position, attach the clutch lever and
slide in the lever fulcrum pin.
Align the projection on the lever fulcrum pin to the groove on the
side of the clutch lever hole and then set the snap pin in the
direction shown in the illustration.
Check the clutch lever for smooth operation.
If the clutch lever does not operate smoothly, ask your dealer or
service shop for maintenance.
1.
2.
3.
4.
5.
6.