Operation Manual

：
：
：
：
：
：
25
TILLER OPERATION6.
Front wheel position adjustment
For transportation Rotary ground clearance:
Approx. 30 mm (1.2 in)
Tilling depth: Approx. 20 mm (0.8 in)
Tilling depth: Approx. 60 mm (2.4 in)
Tilling depth: Approx. 120 mm (4.7 in)
Tilling depth: Approx. 160 mm (6.3 in)
Tilling depth: Approx. 200 mm (7.9 in)
GROOVE
PIN
FRONT WHEEL BEAM
Front wheel height can be changed to adjust the tilling depth and to
transport the tiller.
When the ground is too soft and the tiller gets into the ground, or
when the ground is too hard, adjust the tilling depth in a shallow
position.
Set the tiller on a firm level ground and hold it securely by placing a
suitable block under the transmission case.
Pull the front wheel beam forward to move the pin out of the groove
and set it in the groove you want. Then, secure the pin in the
position.
2.
1.