Operation Manual

28
Handlebar position adjustment
Handlebar height:
950 mm (37.4 in)
835 mm (32.9 in)
HANDLEBAR HEIGHT
ADJUSTING BOLT
NUT
BOLT HOLE
Handlebar height can be set in either the HIGH or LOW position in
accordance with the work or the height of the operator.
Place the tiller on a level surface with the rear wheels and tines on
the ground and secure it not to move.
Remove the nut and handlebar height adjusting bolt.
Move the handlebar to the position you want. Install the bolt by
aligning the bolt holes and tighten the nut securely.
1.
2.
3.