Operation Manual

53
Rotary installation:
RIGHT INNER ROTARY
(Viewed from right side)
LEFT INNER ROTARY
(Viewed from left side)
‘‘R’’ MARK ‘‘L’’ MARK
ROTARY
SETTING
BOLT
SPRING
WASHE R
ROTARY
SETTING
BOLT
LEFT INNER ROTARY
KEY
RIGHT INNER ROTARY
FRONT
Apply grease to the key and set it on the key groove on the rotary
shaft.
Install the inner rotary by aligning the key groove of the inner rotary
with the key on the rotary shaft with ‘‘R’’ (right rotary) mark or ‘‘L’’
(left rotary) mark facing outside as shown.
Install the spring washer and rotary setting bolt, and tighten the
rotary setting bolt securely.
Make sure that the rotary setting bolt is seated to the spring washer
securely.
1.
2.
3.