Fill fuel tank * Use anyautomotivegasoline. Fuel ffiler cap CAUTION: Gasolinesubstitutes are not recommended, they may be harmful to the fuel system components. Recoil starter Check cleaner fordirt orobstruction of ele- ructionof ments. Check reduction gear oil level. Fill with SE rated SAElOW-40 engine oil if necessary.
Turn the en-@ne switch ON. Turn the fuel valve ON. c Loosen the wing nutand throttle lever slightly. raise the Move the throttlelever down fully. Close choke lever. Turn the fuel valve OFF. Set the throttle by tightening the nut at the desired speed. b wing Turn the engine switch OFF. NOTE: Donot use thechoke if the engine is warm or the air temperature 1s high.
II First 20 Hrs. operating I CHANGE ENGINE OIL ANLmDUCI'ION GEAR OIL Every 50 Hr'S. operating * with a lever. ~ - CLEAN AIRCLEANER ELEMENT Clean more frequently if operating in a dusty area. *Remove dust from paper element "B" by applying compressed air from inside B of theelementortapping the case lightly. If the element is excessively dirty replace or wash it in liquid detergent and water and flush until water isclear. Dryitthoroughly by applying compressed air before installIng.
wire end. - - ~~ Cycle, valve arrangement Displacement cc (cu in) Max. output hp/rpm Max. torque kg-m (ft-lb) Fuel consumptiongjhp-h(lb/hp-h) PTO shaft rotation Dry weight kg Ob) Solid wire core mounting A return spring and wire end may be used with a flexible core cable. I Flexible wire core mounting ~ 1 272 (16.61 I I 1.5 (11) 285 (0.62) 1 22 (49) 1 7/3,600 I 406 (24.8) I 1 2.3 (16.6’1 270 (17) 1 10/3,600 Counterclockwise 33 (72.
Current customer service contact information: Servicing dealership personnel are trained professionals. They should be able to answer any question you may have. If you encounter a problem that your dealer does not solve to your satisfaction, please discuss it with the dealership's management. The Service Manager, General Manager, or Owner can help. Almost all problems are solved in this way. United States, Puerto Rico, and U.S.