Owner's Manual

ManualsBrandsHONDA ManualsFor the carGX25

CleaningAIR CLEANER

Inspection

ENGLISH

AIR CLEANER BODY

CHOKE LEVER

UPPER TAB

FILTER ELEMENT

LOWER TABS

AIR CLEANER COVER

Standard/Pump type: Tiller type:

Tiller type:Standard/Pump type:

GX25

GX35

Standard/Tiller type:

FILTER ELEMENT

UPPER LATCH TAB

AIR CLEANER BODY

FILTER ELEMENT

UPPER LATCH TAB

AIR CLEANER COVER

LOWER TABS

CHOKE LEVER

LOWER TABS

Clean the filter elementin warm soapy water, rinse, and allow to

dry thoroughly. Or clean in nonflammable solvent and allow to

dry.

Dip the filter element in clean engine oil, then squeeze out all

excess oil. The engine will smoke when started if too much oil is

left in the foam.

Wipe dirt from the air cleaner body and cover, using a moist rag.

Be careful to prevent dirt from enteringthe carburetor.

A dirty air cleaner will restrict air flow to the carburetor, reducing

engine performance. If you operate the engine in very dusty areas,

clean the air filter element more often thanspecified in the

MAINTENANCE SCHEDULE.

Operating the engine without an air filter element, or with a

damaged air filter element, will allow dirt to enter the engine,

causing rapid engine wear. This type of damage is not covered by

the

Distributor’s Limited Warranty.

Press the latch tab on the topof the air cleaner cover, and remove

the cover. Inspect the filter element. Clean or replace dirty filter

elements. Always replace damagedfilter elements.

Refer to this page for instructions that apply to the air cleaner and

filter service.

Reinstall the filter element and air cleaner cover.

Reinstall the filter element and air cleaner cover securely.

05/12/16 15:00:48 32Z6J600_010