Owner's Manual

SERVICING YOUR HONDA ENGINE
SPARK PLUG SERVICE
Recommended spark plugs: BPR4HS(NGK)
I NOTICE I
Incorrect spark plugs can cause engine damage.
' 1. Disconnect the spark plug caps, and remove any dirt from around
the spark plug area.
2. Remove the spark plugs with a 13/16-inch spark plug wrench.
SPARK PLUG CAP
3. Inspect the spark plugs. Replace 0.024-0.028in
them if the electrodes are worn, (0.60-0.70mm)
or if the insulator is cracked or
chipped. Clean the spark plugs
with a wire brush if you are going
to reuse them.
4. Measure the spark plug electrode
gap with
a suitable gauge. The
gap should be 0.024-0.028 in
(0.60-0.70 mm). Correct the gap,
if necessary, by carefully bending
the side electrode.
5. Install the spark plugs carefully,
by hand, to avoid cross-threading.
39