Owner's Manual

Front Wheels

Removal

1. Place the lawn tractor on a flat, level surface, and set the parking

brake. Block the rear wheels securely. *

CIRCLIP

, DUSTCAP

771IABAA.CDR

2. Lift and securely support the front end of the lawn tractor. Remove

the dust cap, then use circlip pliers to remove and discard the old

circlip. Remove the flat washer and wheel. Note that there is a

second washer on the inside of the wheel.

Installation

1. Apply grease to the axle shaft and inside the wheel hub. If the

inside flat washer was removed, install it back on the axle. Install

the wheel and outside flat washer back onto the axle.

2. Install a new circlip. Do not use the old circlip. Circlips have a

round side and a flat side. Install the new circlip with the flat side

out, being careful not to expand the clip too far. Install the

dustcap.

FLAT SlDE3/ROUND

AXLE END --+

SIDE

7721ACAACDR