User guide

– If the blades are engaged when safety conditions have not been complied with,
the engine shuts down and cannot be restarted (☛ 5.2).
– On disengaging the blades (position "A"), a brake is simultaneously activated
which stops their rotation in few seconds.
– It is possible to engage the blades in reverse only by pressing push-button 4.7.
4.9 C
ONTROL FOR TIPPING GRASS-CATCHER
The grass-catcher may be tipped to empty by pulling the
lever (4.9.1), which can be extracted from its housing.
The grass-catcher may be emptied by pressing the push-
button (4.9.2), keeping it pressed until the control motor
stops.
The grass-catcher returns to the working position by press-
ing the push-button (4.9.3), keeping it pressed until the
pawl hooks into place and the control motor stops.
4.10 I
NDICATOR LIGHTS AND SOUND WARNINGS ON THE DASHBOARD
a) The display comes on when the key is
inserted (4.4):
– it indicates the battery voltage in the
«ON» position, before starting the
engine;
– it indicates the engine’s total operation
time in the «ON» position, with the
engine started;
– a blinking decimal point (.) indicates that
the counter is working.
The warning lights come on when the key is
in the «ON» position and stay on simultane-
ously for approximately 2 seconds (in com-
bination with an intermittent warning sound)
to indicate proper functioning.
HF2•••HTE
➤
HF2•••HMEHF2•••SBE
➤
EN 18 CONTROLS AND INSTRUMENTS
m
a
b c d e f g h j
l
HF2620HTE
➤
m
a
b c d e f g h
l
HF2417HTE
➤
4.9.1
4.9.2
4.9.3