User guide

EN 42 MAINTENANCE
6.2.2 GUIDE TO SCHEDULED MAINTENANCE
This table is to help you maintain your machine’s safety and performance. It
shows the main maintenance and lubrication work, indicating the frequency with
which it should be carried out.
To the right of each item there is a box where you write the date or after how
many hours of operation the work was carried out.
WORK HOURS
DONE (DATEORN° OF HOURS)
1. MACHINE
1.1 Check of tightness and sharpness of blades
25
1.2 Blade replacement 100
1.3 Check the transmission belt 25
1.4 Transmission belt replacement
2)
–
1.5 Check the blade drive belt 25
1.6 Blade drive belt replacement
2)
–
1.7 Check the belt connecting blades 25
1.8 Replacement of belt connecting blades
2)
–
1.9 Check and adjustment of brake 10
1.10 Check and adjustment of drive 10
1.11 Check engagement and brake of blade 10
1.12 Check all fastenings for tight fitting 25
1.13 General lubrication
3)
25
1.14 Check the battery level 25
1.15 Battery charge 100
2. ENGINE
1)
2.1 Check oil level
1)
–
2.2 Engine oil change
4)
100
2.3 Oil filter replacement
4)
100
2.4 Check and cleaning of air filter 50
2.3 Air filter replacement 300
2.4 Check fuel filter 100
2.5 Fuel filter replacement 300
2.6 Check and cleaning of spark plug points 100
2.7 Replacement of spark plug 300
1)
Check each time used.
2)
Replace at the first signs of wear, contacting your authorized Honda engine dealer.
3)
General lubrication should also be carried out whenever the machine is to be left unused
for a long period.
4)
Operation to be performed also after the first 20 hours of operation.
5)
Carry out maintenance of the air filter more frequently in the case of use on dusty
ground.
6)
Replace the paper element only.