User guide

EN 43MAINTENANCE

6.2.3 REAR AXLE

This is a sealed single unit which does not require maintenance. It is permanently

lubricated and this lubricant does not need changing or topping up.

6.2.4 B

ATTERY

To ensure long life to the battery, it is essen-

tial to keep it carefully maintained. The bat-

tery on your machine must be charged

before using for the first time (☛ 3.4).

During periods when it is not used, the

charge level can be kept constant by using

the maintenance battery charger supplied.

For this purpose the machine is supplied

with a connector (1) to be connected to the

corresponding battery charger connector.

No device other than the battery charger is to be connected

to this connector.

The charge must be maintained with the battery charger, fol-

lowing the instructions given in the instruction booklet. Other recharging sys-

tems may definitively damage the battery.

A low battery must be recharged as soon as possible. Otherwise, irreparable

damage could be done to the battery’s elements.

Periodically check the electrolyte level, which must be between the MIN and MAX

marks on the battery. When topping off, use ONLY distilled water for batteries.

IMPORTANT