Operation Manual

10. TRANSP0RTUNG/STORAGE
m When transporting the engine, turn the fuel valve to the OFF
position and keep the engine level to prevent fuel spillage. Fuel vapor or
spilled fuel may ignite.
Before storing the unit for an extended period;
1. Be sure the storage area is free of excessive humidity and dust.
2. Drain the fuel...
a. With the fuel valve in the OFF position, remove and empty the sedi-
ment cup.
b. Turn the fuel valve to the ON position and drain the gasoline from the
fuel tank into a suitable container.
c. Replace. the sediment cup and tighten securely.
d. Drain the carburetor by loosening the drain screw. Drain the gasoline
into a suitable container.
c%mi Gasoline is extremelv flammable and is exolosive under certain
conditions. Do not smoke or
allbw flames or sparks in the area.
DRAIN SCREW
(optional)
SEDIMENT CUP
3. Change the engine oil (page 21 I.-
I
4. Remove the spark plug and pour about a tablespoon of clean engine oil
into the cylinder. Crank the engine several revolutions to distribute the
oil, then reinstall- the spark plug.
5. Pull the starter rope slowly until resistance is felt. Continue pulling until
the notch on the starter pulley aligns with the hole on the recoil starter
(see illustration below). At this point, the intake and exhaust valves are
closed, and this will help to protect the engine from internal corrosion.
Align the notch on the starter pulley
with the hole at the top of recoil starter.
6. Electric starter type: Remove the battery and store it in a cool, dry place.
Recharge it once a month.
7. Cover the engine to keep out dust.
30