Replacement Part List
Table Of Contents
- INTRODUCTION
- CONTENTS
- GENERATOR SAFETY
- ASSEMBLY
- INITIAL USE INSTRUCTIONS
- CONTROLS & FEATURES
- BEFORE OPERATION
- OPERATION
- SERVICING YOUR GENERATOR
- STORAGE
- TRANSPORTING
- TAKING CARE OF UNEXPECTED PROBLEMS
- TECHNICAL INFORMATION
- CONSUMER INFORMATION
- OPTIONAL PARTS
- REFERENCE INFORMATION
- INDEX
- QUICK REFERENCE INFORMATION
ASSEMBLY
15
Wheel Kit Installation
1. Install the two stands on the under frame using four 8×16 mm flange bolts.
2. Install the two wheels on the axle shaft using the plain washers and split pins.
After installing the split pins, bend the pins to ensure that the wheels are
secured to the axle.
3. Install the axle assembly on the generator using four 8×16 mm flange bolts
and 8 mm flange nuts.
Torque: 19.5 lbf·ft (26.5 N·m, 2.7 kgf·m)
8×16 mm FLANGE BOLT (8)
SHORTER
UNDER FRAME
GENERATOR
SIDE
AXLE SHAFT
20 mm
PLAIN WASHER (2)
4.0×28 mm
SPLIT PIN (2)
8 mm FLANGE NUT (4)
STAND (2)
WHEEL (2)
31Z236200.book 15 ページ ２０２０年２月２０日 木曜日 午後１時８分