Replacement Part List
Table Of Contents
- INTRODUCTION
- CONTENTS
- GENERATOR SAFETY
- ASSEMBLY
- INITIAL USE INSTRUCTIONS
- CONTROLS & FEATURES
- BEFORE OPERATION
- OPERATION
- SERVICING YOUR GENERATOR
- STORAGE
- TRANSPORTING
- TAKING CARE OF UNEXPECTED PROBLEMS
- TECHNICAL INFORMATION
- CONSUMER INFORMATION
- OPTIONAL PARTS
- REFERENCE INFORMATION
- INDEX
- QUICK REFERENCE INFORMATION
SERVICING YOUR GENERATOR
69
4. Measure the spark plug electrode gap with a wire-type feeler gauge. Correct
the gap, if necessary, by carefully bending the side electrode.
Spark plug gap: 0.028–0.031 in (0.7–0.8 mm)
5. Make sure that the spark plug sealing washer is in good condition, and thread
the spark plug in by hand to prevent cross-threading.
6. After the spark plug is seated, tighten with a spark plug wrench to compress
the washer.
If reinstalling a used spark plug, tighten 1/8–1/4 turn after the spark plug is
seated.
If installing a new spark plug, tighten 1/2 turn after the spark plug is seated.
Torque: 13.0 lbf·ft (17.7 N·m, 1.8 kgf·m)
A loose spark plug can overheat and damage the engine.
Overtightening the spark plug can damage the threads in the cylinder head.
7. Attach the spark plug cap.
SIDE ELECTRODE
0.028–0.031 in (0.7–0.8 mm)
SEALING WASHER
31Z236200.book 69 ページ ２０２０年２月２０日 木曜日 午後１時８分