Replacement Part List
Table Of Contents
- INTRODUCTION
- CONTENTS
- GENERATOR SAFETY
- ASSEMBLY
- INITIAL USE INSTRUCTIONS
- CONTROLS & FEATURES
- BEFORE OPERATION
- OPERATION
- SERVICING YOUR GENERATOR
- STORAGE
- TRANSPORTING
- TAKING CARE OF UNEXPECTED PROBLEMS
- TECHNICAL INFORMATION
- CONSUMER INFORMATION
- OPTIONAL PARTS
- REFERENCE INFORMATION
- INDEX
- QUICK REFERENCE INFORMATION
SERVICING YOUR GENERATOR
70
SPARK ARRESTER SERVICE
The spark arrester must be serviced every 100 hours to keep it functioning as
designed.
If the engine has been running, the muffler will be very hot. Allow the muffler to
cool before servicing the spark arrester.
Clean the spark arrester as follows:
1. Remove the two 5 mm screws, and remove the spark arrester.
2. Use a brush to remove carbon deposits from the spark arrester screen.
Be careful to avoid damaging the screen.
The spark arrester must be free of breaks and tears. Replace the spark arrester
if it is damaged.
3. Install the spark arrester in the reverse order of removal.
5 mm SCREWS SPARK ARRESTER
SPARK ARRESTER SCREEN
31Z236200.book 70 ページ ２０２０年２月２０日 木曜日 午後１時８分