Replacement Part List
Table Of Contents
- INTRODUCTION
- CONTENTS
- GENERATOR SAFETY
- ASSEMBLY
- INITIAL USE INSTRUCTIONS
- CONTROLS & FEATURES
- BEFORE OPERATION
- OPERATION
- SERVICING YOUR GENERATOR
- STORAGE
- TRANSPORTING
- TAKING CARE OF UNEXPECTED PROBLEMS
- TECHNICAL INFORMATION
- CONSUMER INFORMATION
- OPTIONAL PARTS
- REFERENCE INFORMATION
- INDEX
- QUICK REFERENCE INFORMATION
SERVICING YOUR GENERATOR
76
FUSE
If the fuse is blown, the starter motor won’t operate.
In the event of fuse failure, locate the cause of failure and repair it before you
continue operation. If the fuse continues to fail, discontinue generator use and
consult an authorized Honda Power Equipment dealer.
1. Turn the engine switch to the OFF position and remove the key before
checking or replacing the fuse.
2. Remove the fuse holder cover and
pull the fuse out.
3. Replace the fuse with a fuse of the
same type and rating.
Specified fuse: 20 A
Never use a fuse with a different
rating from that specified.
Serious damage to the electrical
system or fire may result.
4. Install the fuse holder cover in the reverse order of removal.
FUSE (20 A)
FUSE HOLDER COVER
31Z236200.book 76 ページ ２０２０年２月２０日 木曜日 午後１時８分