Operation Manual

OPERATION
18
E
Drive Clutch Lever
Push the drive clutch lever [4]
forward and hold it against the
handlebar to propel the mower
forward.
Release the drive clutch lever to
stop the mower’s forward
movement.
Always release the drive clutch
lever before starting the engine. If
the drive clutch is engaged, the
mower will move forward when you operate the starter.
Operate the drive clutch lever with a quick and complete motion, so the
drive clutch is either fully engaged or fully released. Hold the drive
clutch lever against the handlebar during self-propelled mowing. This
will help to extend the service life of the clutch mechanism.
Shift Lever
Use the shift lever to adjust the
forward speed of the mower. Do
not use the throttle lever; the
throttle lever must be kept in the
FAST position for the best
mowing performance.
You may move the shift lever
anytime; however, if the mower
is pulling hard, release the drive
clutch lever between shifts for
smooth operation.
Gears 1 and 2 are
recommended for maximum
mowing performance. Gear 3
should be used to transport the mower.
[4]
1
3
2
1E-HRZ536C.book Page 18 Thursday, September 8, 2005 11:16 AM