Operation Manual

57
DRIVE CLUTCH LEVER
LOW
RANGE
FAST
RANGE
AUGER CLUTCH SWITCH
MAIN SHIFT LEVER
MAIN SHIFT LEVER
Move the main shift lever fully
to the end of the forward low
speed range slowly and clear
the snow.
When the auger hits against
the road or inclines to a side,
adjust the auger housing
position by operating the
auger housing control switch.
When the snow is small in
volume or light in nature,
move the main shift lever to
the high speed side. Perform
minor adjustment of the main
shift lever to stabilize the
operating speed if necessary.
To move from one place to
another, or to change direction,
use the drive clutch lever only.
Release the drive clutch lever
once, then squeeze the drive
clutch lever again.
When the drive clutch lever is
released, the auger clutch
switch indicator (green) goes
off, both the auger and blower
stop turning, and the
snowblower stops moving.
5)
6)
11/06/18 14:57:52 32V15630_059