Use and Care Manual

INITIAL USE INSTRUCTIONS

LIST OF LOOSE PARTS

Remove the loose parts carton and compare the loose parts against

the following list. Contact an authorized Honda dealer from whom you

purchased the snow blower if any of the loose parts shown are not

included with your snow blower.

Ref

No.

Description Qty.

 Tool kit (see page 41) 1

Bottle of oil (16 oz) HSS928A 1

Bottle of oil (16 oz) HSS1332A 2

! Skid shoes 2

" Ignition key 2

# Owner’s manual 1



PAGE 1
INITIAL USE INSTRUCTIONS LIST OF LOOSE PARTS Remove the loose parts carton and compare the loose parts against the following list. Contact an authorized Honda dealer from whom you purchased the snow blower if any of the loose parts shown are not included with your snow blower. Ref No. Description Qty.
PAGE 2
INITIAL USE INSTRUCTIONS ADD ENGINE OIL The snow blower is shipped WITHOUT OIL in the engine. OIL FILLER CAP UPPER LIMIT 1.With the snow blower on a level surface, remove the oil filler cap/ dipstick. 2.Add oil from the included bottle(s) of oil into the oil filler opening to the top of the filler opening (upper limit). All Honda engines are run at the factory prior to packaging. Most of the oil is removed prior to shipment; however, some oil remains in the engine.
PAGE 3
INITIAL USE INSTRUCTIONS PLEASE REGISTER YOUR SNOW BLOWER Please take a few minutes and register your purchase with Honda. You can register: • By completing and mailing the registration card on the inside the back cover of this book • Going on-line to powerequipment.honda.