Use and Care Manual

22
Maintenance
As the power equipment engine owner, you are responsible for
completing all required maintenance listed in your owner's manual.
Honda recommends that you retain all receipts covering maintenance
on your power equipment engine, but Honda cannot deny warranty
coverage solely for the lack of receipts or for your failure to ensure
that all scheduled maintenance has been completed.
Follow the “Maintenance Schedule” on page 14. Remember this
schedule is based on the assumption that your machine will be used
for its designed purpose. Sustained high-load or high-temperature
operation, or use in unusually wet or dusty conditions, will require
more frequent service.
Air Index
An Air Index Information hang tag/label is applied to engines certified
to an emission durability time period in accordance with the
requirements of the California Air Resources Board.
The graph is intended to provide you, our customer, the ability to
compare the emissions performance of available engines. The lower
the Air Index, the less pollution.
The durability description is intended to provide you with information
relating to the engine’s emission durability period. The descriptive
term indicates the useful-life period for the engine’s emission control
system. See your “EMISSION SYSTEM WARRANTY” on page 26 for
additional information.
Specifications
Frame
Engine
Tune-up
Specifications are subject to change without notice.
Descriptive
Term
Applicable to Emission Durability Period
Moderate
50 hours (0 – 80 cc, inclusive)
125 hours (greater than 80 cc)
Intermediate
125 hours (0 – 80 cc, inclusive)
250 hours (greater than 80 cc)
Extended
300 hours (0 – 80 cc, inclusive)
500 hours (greater than 80 cc)
1,000 hours (225 cc and greater)
HSS724A
Track
Track/
Elec. Start
Wheel
Wheel/
Elec. Start
Description code SABA
Overall length 58.5 in (1,485 mm)
Overall width 24.8 in (630 mm) 26.4 in (670 mm)
Overall height 43.5 in (1,105 mm)
Handlebar height 37.0 in (940 mm) 36.6 in (930 mm)
Dry weight [mass]
231 lb
(105 kg)
243 lb
(110 kg)
209 lb
(95 kg)
220 lb
(100 kg)
Width of snow
clearance
23.8 in (605 mm)
Height of snow
clearance
21.7 in (550 mm)
Snow throwing
distance (varies with
snow conditions)
Max. 49 ft (15 m)
Clearing capacity 46 short (42 metric) ton/hour
HSS724A
Track
Track/
Elec. Start
Wheel
Wheel/
Elec. Start
Model Honda GX200T2
Displacement
12.0 cu-in (196 cm
3
)
Bore x stroke 2.68 x 2.13 in (68.0 x 54.0 mm)
Starting method
Recoil
starter
Recoil
starter or
DC electric
starter
Recoil
starter
Recoil
starter or
DC electric
starter
Ignition system Transistor magneto
Oil capacity 0.6 US qt (20 oz, 0.6 L)
Fuel tank capacity 0.82 US gal (3.1 L)
Spark plug
BPR5ES (NGK)
W16EPR-U (DENSO)
Item Specification Maintenance
Spark plug gap
0.028 - 0.031 in
(0.7 - 0.8 mm)
See page 15
Valve clearance
IN: 0.15 ± 0.02 mm
EX: 0.20 ± 0.02 mm
See your authorized
Honda dealer
Other specifications No other adjustments needed.