Full Product Manual

10
INITIAL USE INSTRUCTIONS
ADD ENGINE OIL
The snow blower is shipped WITHOUT OIL in the engine.
1.With the snow blower on a level surface, remove the oil filler cap/
dipstick.
2.Add oil from the included bottle(s) of oil into the oil filler opening
until it reaches the upper limit mark on the dipstick. Do not thread
the dipstick in when checking the oil level.
All Honda engines are run at the factory prior to packaging. Most of
the oil is removed prior to shipment; however, some oil remains in
the engine. The amount of oil left in the engine varies.
3.If you don’t use the supplied oil, add enough recommended oil
(page
48) to bring the oil level to the upper mark on the dipstick. Do
not thread the dipstick in when checking the oil level.
4.Do not overfill the engine with oil. After filling the engine with oil,
screw the filler cap/dipstick in and remove the hang tag near the
recoil starter grip that says “The engine has no oil.”
OIL FILLER CAP
UPPER LIMIT