Manualshelf

Full Product Manual

ManualsBrandsHonda ManualsGas Snow Blowers28 in. Hydrostatic Wheel Drive 2-Stage Snow Blower with Electric Joystick Chute Control
51525354555657585960
49
SERVICING YOUR SNOW BLOWER
SPARK PLUG SERVICE
Required spark plug: BPR5ES (NGK) or W16EPR-U (DENSO)
Use only the required spark plug or equivalent. Spark plugs which have
an improper heat range may cause engine damage.
To ensure proper engine operation, the spark plug must be properly
gapped and free of deposits. If the engine has been running, the
muffler will be very hot. Be careful not to touch the muffler.
1.Remove the spark plug cap.
2.Clean any dirt from around the
spark plug base.
3.Use the spark plug wrench
supplied in the tool kit to
remove the spark plug.
4.Inspect the spark plug. Replace
it if the electrodes are worn or
if the insulator is cracked,
chipped, or fouled.
SPARK PLUG WRENCH
SPARK PLUG CAP