Full Product Manual

59
STORAGE
Draining the Fuel Tank and Carburetor
1.Place an approved gasoline container
below the carburetor, and use a
funnel to avoid spilling fuel.
2.Loosen the carburetor drain knob,
then move the fuel valve lever to the
ON position. Drain the carburetor
until the fuel tank is empty.
3.After draining, tighten the drain
knob and turn the fuel valve OFF.
4.Remove the fuel sediment cup. Do
not remove the O-ring. Confirm the
O-ring is properly positioned and in
good condition. Contact your
authorized Honda dealer if the
O-ring needs to be replaced.
5.Empty the contents of the
sediment cup into a suitable
container. Clean the fuel
sediment cup.
6.Reinstall the sediment cup and tighten securely.
Gasoline is highly flammable and explosive.
You can be burned or seriously injured when
handling fuel.
•Keep heat, sparks, and flames away.
•Handle fuel only outdoors.
•Wipe up spills immediately.
DRAIN KNOB
O-RING
SEDIMENT
CUP