Operation Manual

▲
▼
▲▼
Interior Light Dimming Time
Press the SEL/RESET button to see
the selections.
When your selection is successfully
completed, the display changes as
shown above, and then goes back to
the customizable item screen.
If the ‘‘SETTING INCOMPLETE’’
message appears, go back to
‘‘INTERIOR LIGHT DIMMING
TIME’’ and repeat the
procedure again.
The interior lights fade out when you
close all doors. To change how long
thelightsstayonbeforetheyfade
out, follow these instructions:
You can choose this item to
customize from ‘‘LIGHTING
SETUP’’ by pressing the INFO ( /
) button repeatedly.
Select the desired setting (15sec,
30sec, or 60sec) by pressing the
INFO ( / ) button, then enter
your selection by pressing the SEL/
RESET button.
CONTINUED
Multi-Information Display
105
12/07/13 16:50:43 31TM8630_110
Instruments and Controls
TOC
2013 Insight