Operation Manual

The scan function samples all
stations with strong signals on the
selected RDS category. To activate it,
press and release the SCAN button.
You will see SCAN in the display.
The system will scan for a station
with a strong signal in the selected
RDS category. You will also see the
selected RDS category name
blinking while searching it. When it
finds a strong signal, it will stop and
play that station for about 10 seconds.
If you do nothing, the system will
scan for the next strong station and
play it for 10 seconds. When it plays
a station that you want to listen to,
press the SCAN button again.
This function searches a frequency
for a strong signal from the
frequency that carry the selected
RDS category information. This can
helpyoutofindastationinyour
favorite category. To activate it,
press the or side of the
SEEK button. You will see the
selected RDS category name
blinking while searching it. When
the system finds a station, the
selected RDS category name will be
displayed again for about 5 seconds.
If the system does not find a station,
‘‘NOTHING’’ blinks for about five
seconds, then the system goes back
to the last selected station.
If the system does not find a station,
‘‘NOTHING’’ blinks for about five
seconds, then the system goes back
to the last selected station.
You can use the RDS program
search or scan function even if the
RDS information display
function is off. In this case, the
display shows a frequency in place
of a RDS station name.
RDS Program SCANRDS Program Search
Playing the FM/AM Radio (LX model and EX model without navigation system)
186
12/07/13 17:00:17 31TM8630_191
Features
TOC
2013 Insight