Operation Manual

Examine the new wiper blades. If
they have no plastic or metal
reinforcement along the back
edge, remove the metal
reinforcement strips from the old
wiper blade, and install them in
the slots along the edge of the
new blade.
Make sure the two rubber tabs
inside the blade fit to each notch of
the reinforcement, as shown.
Remove the blade from its holder
by grabbing the tabbed end of the
blade. Pull firmly until the tabs
come out of the holder.
Push the blade assembly toward
thebaseofthearm.
When replacing a wiper blade,
make sure not to drop the
wiper blade or wiper arm
down on the windshield.
3. 4.
5.
Wiper Blades
336
BLADE
REINFORCEMENT
WIPER ARM
BLADE
TOP
12/07/13 17:19:36 31TM8630_341
Maintenance
TOC
2013 Insight