Operation Manual

Lift the head restraint (see page
), then route the tether strap
through the legs of the head
restraint and over the seat-
back, making sure the
strap is not twisted.
Other LATCH-compatible seats
have a flexible-type connector
as shown above.
Whatever type you have, follow
the child seat maker’s instructions
for adjusting or tightening the fit.
Place the child seat on the vehicle
seat, then attach the seat to the
lower anchors according to the
child seat maker’s instructions.
Some LATCH-compatible seats
have a rigid-type connector as
shown above.
5.
4.
3.
142
Installing a Child Seat
48
ANCHOR
TETHER STRAP HOOK
Flexible type
Rigid type
12/07/13 16:43:01 31TM8630_053
Driver and Passenger Safety
TOC
2013 Insight