Operation Manual

64
Maintenance procedures
Cleaning the docking station
N WARNING
- Unplug the transformer’s plug from the power outlet (House) before cleaning it.
Clean dirt and grass off of the docking station using a brush.
Brush off dirt and grass from docking station, particularly around
parts on which the lawnmower rests and around the charging plug area:
Charging plug
Checking
Checking the manual STOP button
N WARNING
- Do not touch the blades with your hands.
- Do not lift the lawnmower off of the ground while checking or cleaning it.
Check item(s) Action
Manual STOP button and
control panel cover
Normal operation of the
manual STOP button (and
the control panel cover)
While performing a test operation of the
lawnmower, press the manual STOP button. If
the lawnmower does not stop (and the control
panel cover does not open), consult your
dealer.
1
Press the A (On) button on the control panel.
2
Test a start point (M page 43). When the lawnmower
is moving, press the manual STOP button and
check that the lawnmower stops.
VP7Z.indb 64 2014/12/18 14:26:02