Operation Manual

30
Digital Clock
The digital clock will show hours and minutes
up to 12:59 with ʻʻAMʼʼ and ʻʻPMʼʼ.
To adjust the time, proceed as follows:
1. Turn the ignition switch ON.
2. Push and hold both the SEL button (2)
and SET button (3) for more than 2
seconds. The clock will be set in the
adjust mode with the hour display
flashing.
3. To set the hour, push the SEL button until
the desired hour and AM/PM are
displayed.
• The time is advanced by one hour,
each time the button is pushed.
• The time advances fast when the
button is pushed and held.
(1) Digital clock
(2) SEL button
(3) SET button
(1)
(2) (3)