User guide

4 © 2004 American Honda Motor Co., Inc.
- All Rights Reserved.
4625011B
During the Panic
Alarm Activation
Emergency Disarming
LOCK
Status LED
Turn the ignition key to the ON (II) position.
The system stops the panic alarming when the ignition k
ey is turned to the ON (II) position.
Check to see the status LED goes off.
1
2
Enter the vehicle and insert the ignition key.
• The system can be disarmed using the ignition ke
y regardless of the method used to arm
the system.
• This method of disarming also serves as an emergency o
verride if the remote control
transmitter cannot be used.
During the Entry Delay
Time
• When the system is being armed by the AUTOMATIC ar
ming method, there is a
20-seconds entry delay time after opening a door or the tailgate
.
• If the system is armed by the remote control transmitter
, the entry delay time is set to 0
seconds, and the alarm is triggered immediately when a door is opened.
ON
LOCK
To disarm the entry delay time mode, insert the ignition k
ey after opening a door or the tailgate.
Turn the ignition key to the ON (II) position. The security system disar
ms when the ignition key is
turned to the ON (II) position.
Check to see the status LED goes off.
1
ON