Owner's Manual

Taking Care of the Unexpected
198
If You Have a Flat Tire
Refer to Safety Precautions on page 91.
Removal
1. Park your Honda SXS on a firm, level surface.
2. Loosen — but do not remove — the wheel nuts.
3. Raise the front (or rear) wheels off the ground (page 109).
4. Remove the wheel nuts.
5. Remove the wheel.
• Avoid getting grease, oil, or dirt on the disc or pad surfaces
when removing and installing each wheel. Any contamination
can cause poor brake performance or rapid pad wear after
reassembly.
Emergency Wheel Removal/Installation
wheel nuts
wheel rim
wheel nuts
14 SXS700-31HL36000.book 198 ページ ２０１３年５月１４日 火曜日 午前１０時５９分