Full Product Manual

19
3.2 Installation of Grass Debris Shield
Follow the procedure below to install the grass debris shield.
If the blades are provided, remove the blades before performing this work.
Note
● If a grass cutting steel blade is installed, a different grass debris shield is required (included in blade kit).
However, the installation procedure is the same.
Grass debris shield for cutting-line head Grass debris shield for grass cutting steel blade
(Option)
Cutting knife
● Do not remove the grass debris shield. If the grass debris shield is damaged, contact your servicing
dealer.
Set the start/stop switch to OFF (O side) to stop the engine.
Remove the attachment from the powerhead.
Put on gloves.
Install the grass debris shield [2] and
the plate [3], and x it to the gear case
[1] by tightening with the fixed screw [4]
(4pcs.). The fixed screws can be
tightened using the tool supplied with
the UMC powerhead.
1
2
3
[4]
[3]
[1]
[2]
4