Operation Manual

Servicing Your Honda
149
Drive Chain
Refer to Safety Precautions on page 94.
1. To adjust slack, loosen the rear axle holder fixing bolts (1).
2. Turn the adjusting nut (2) to decrease or increase chain slack.
3. Retighten the rear axle holder fixing bolts.
4. Rear axle holder fixing bolts torque:
88 N·m (9.0 kgf·m, 65 lbf·ft)
If a torque wrench is not used for this installation, see your dealer as
soon as possible to verify proper assembly.
Adjustment
REAR
(1)
(1) rear axle holder fixing bolts
(2) adjusting nut
(2)
14 TRX90X-32HP26700.book 149 ページ ２０１３年８月５日 月曜日 午後２時２０分