Operation Manual

Before Riding
44
Is Your ATV Ready to Ride?
Check the following items before you get on the ATV:
Pre-ride Inspection
Engine Oil Check the level and add oil if needed
(page 112).
Check for leaks.
Fuel Check the level and add fuel (page 107) if
needed. Also make sure the fuel fill cap is
securely fastened.
Check for leaks.
Tyres Use a gauge to check the air pressure. Adjust if
needed. Also look for signs of damage or
excessive wear (page 137).
Drive Chain Check the condition and slack. Adjust and
lubricate if needed. Also check the chain slider
for wear and replace if needed (page 145).
Guards Check for damage (page 143).
Nuts & Bolts Check the wheels to see that the axle nuts are
tightened. Use a wrench to make sure all
accessible nuts, bolts, and fasteners are tight.
Underbody &
Exhaust System
Check for, and remove, any dirt, vegetation or
other debris that could be a fire hazard or
interfere with the proper operation of the
vehicle.
14 TRX90X-32HP26700.book 44 ページ ２０１３年８月５日 月曜日 午後２時２０分