Operation Manual

Before Riding

Is Your ATV Ready to Ride?

Check these items after you get on the ATV:

Remember, be sure to take care of any problem you find, or have

your dealer correct it before you ride.

Leaks, Loose Parts Walk around your ATV and look for anything

that appears unusual, such as a leak or loose

cable.

Cable Check the cable housings for wear. Check the

fittings for looseness. Replace or tighten as

needed.

Throttle Check the freeplay and adjust if needed.

Press the throttle to make sure it moves

smoothly without sticking, and snaps shut

automatically when it is released, in all

steering positions (page 119).

Brakes Squeeze the front and rear brake levers and

step on the rear brake pedal to check that

the controls operate normally. Check for

proper freeplay (pages 129 — 134).

Engine Stop Switch Check for proper function (page 30).

Steering Check that the wheels turn properly as you

steer the handlebar. Move the handlebar

right and left and check that there is no

excessive backlash.

14 TRX90X-32HP26700.book 45 ページ２０１３年８月５日　月曜日　午後２時２０分