Operation Manual

Electrical Trouble u Burned-out Light Bulb
113
Troubleshooting
❙
Front/Rear Turn Signal Light
The front and rear turn signal lights use
several LEDs.
If there is a LED which is not turned on, see
your dealer for this service.
❙
License Plate Light
1. Remove the screws.
2. Remove the license light cover and license
light cover packing.
3. Pull out the bulb without turning.
4. Install a new bulb and parts in the reverse
order of removal.
Turn signal light
Screws
Bulb
Packing
License light cover
15 VFR800X-32MJM8000.book 113 ページ ２０１４年１２月１９日 金曜日 午後１時４０分