Operation Manual

49
Operation Guide
continued
Tool Kit/Document Bag
The tool kit is located under the rear seat.
Secure the tool kit with the rubber strap A
(large-diameter) as shown in the illustration.
The document bag is located under the front
seat.
❙
Removing the Rear Seat (P68)
Document bag
Tool kit
Rubber strap A
U-shaped Lock
A U-shaped lock is held in place above the
rear fender.
!a Remove the rubber strap A (large-diameter)
and tool kit from the rear fender.
!b
Place the U-shaped lock onto the rear
fender, and then secure it by hooking the
rubber
strap B (small-diameter) at the
three points as shown in the illustration.
u Some U-shaped locks may not fit in the
compartment due to their size or design.
Rubber strap B U-shaped lock
Hook points
15 VFR800X-32MJM8000.book 49 ページ ２０１４年１２月１９日 金曜日 午後１時４０分