Owner's Manual

SERVICING YOUR PUMP

SPARK ARRESTER SERVICE (optional equipment)

The spark arrester must be serviced every 100 hours to keep it

functioning as designed.

1. Allow the engine to cool, then remove the two 8 mm nuts and

remove the muffler from the cylinder head.

2. Remove the four 5 mm screws from the muffler protector and

remove the muffler protector.

3. Remove the 4 mm screw from the spark arrester and remove the

spark arrester from the muffler.

4. Use a soft brush to remove

carbon deposits from the spark

arrester screen. Be careful not

to damage the spark arrester

screen.

5. Inspect the spark arrester for

breaks and holes. Replace it if

necessary.

6. Install the spark arrester and

the muffler in the reverse order

of disassembly.

MUFFLER

PROTECTOR

NUTS, 8 mm (2)

MUFFLER

SPARK

ARRESTER

SCREW, 4 mm

SCREW, 5 mm (4)

MUFFLER

SPARK ARRESTER SCREEN