Operation Manual

17
4. PRE-OPERATION FOR STARTING
For safe and efficient spraying, always make a pre-operation inspection
before operating:
Before performing a pre-operation inspection, place the power sprayer
on a level surface, stop the engine and make sure that the engine
switch is in the OFF position to be certain the engine will not start
accidentally.
1. Assembling a nozzle.
1. Connect the sprayer hose to the nozzle lever.
2. Connect the nozzle pipe to the nozzle lever.
3. Connect the nozzle tip to the nozzle pipe.
• Be sure to install packing and connect each part securely.
2. Connect the sprayer hose into the pump.
WJR1525:
NOZZLE LEVER
NOZZLE PIPE
SPRAYER HOSE
NOZZLE LEVER
WJR2525:
NOZZLE PIPE
SPRAYER HOSE
NOZZLE TIP
PACKING
NOZZLE PIPE
PUMP
SPRAYER HOSE