Operation Manual

37
1. Changing oil
Drain the oil while the engine is still warm to assure rapid and complete
draining.
Place the power sprayer on a firm level surface with the engine stopped.
1. Check the fuel tank cap is tightened securely.
2. Remove the oil filler cap and drain the oil into the oil container by inclining
the engine toward the oil filler neck.
3. Refill to the top of the oil filler neck with the recommended oil (see page 19).
Add the engine oil slowly to avoid overflowing, as the engine oil tank
capacity is small.
OIL CAPACITY: 0.08 L (0.08 US qt, 0.07 Imp qt)
4. Install the oil filler cap.
If any oil is spilled, make sure to wipe it.
Wash your hands with soap and water after handling used oil.
NOTE:
Please dispose of used motor oil in a manner that is compatible with the
environment. We suggest you take it in a sealed container to your local
service station for reclamation. Do not throw it in the trash or pour it on the
ground, or down a drain.
FUEL TANK CAP
OIL FILLER NECK
UPPER LIMIT
UPPER LIMIT