Operation Manual

48
10. TROUBLESHOOTING
When the engine will not start:
1. Is the engine switch in the ON position?
2. Is there fuel in the fuel tank?
3. Is gasoline reaching the carburetor?
To check, press the priming bulb several times.
4. Is the spark plug in good condition?
Remove and inspect the spark plug. Clean, readjust gap and dry the
spark plug. Replace it if necessary.
If the engine still does not start, take the power spryer to an authorized
Honda dealer.
When the sprayer sprays irregularly:
CHEMICALS NOT SPRAYED
1. Check that the engine speed is not lowered (see page 32).
ATOMIZING PRESSURE NOT RAISED
1. Check the nozzle for clogging or signs of damage.
2. Disassemble and maintain the nozzle (see page 44).
If the power sprayer still does not operate, take the power sprayer to an
authorized Honda dealer.