Owner's Manual

STORAGE

REMOVAL FROM STORAGE

Place the pump on a level surface. Tilting can cause fuel or oil leakage.

With the engine and exhaust system cool, cover the pump to keep out

dust. A hot engine and exhaust system can ignite or melt some

materials. Do not use sheet plastic as a dust cover. A nonporous cover

will trap moisture around the pump, promoting rust and corrosion.

Check your pump as described in the

BEFORE OPERATION

chapter of

this manual.

If the fuel was drained during storage preparation, fill the tank with

fresh gasoline. If you keep a container of gasoline for refueling, be

sure that it contains only fresh gasoline. Gasoline oxidizes and

deteriorates over time, causing hard starting.

If the cylinder was coated with oil during storage preparation, the

engine may smoke briefly at startup. This is normal.

12/01/16 12:32:32 31YG0610_048